Are you looking to buy a Voron 2.4 R2 Functional Parts set in Australia?
Voron Kits will NOT ship in 24 to 48 hours like other print on demand products.
Kits can sometimes take up to a week per kit depending on extras and configurations.
Due to high demand there is often a queue.
You will be notified of your position via email.
This is a full functional parts set designed to get your 2.4 kit up and running so you are able to print the nonfunctional parts needed to complete the kit.
All parts are printed in eSun ABS or Polymaker ABS - Please let us know in your order comments what Colour Accent parts you would like.
Hotend configurations for this kit come with Afterburner Printed Parts.
Please check the BOM for your printer and purchase a Stealthburner kit separately if required.
Stealthburner CW1
Stealthburner CW2
View all our Voron 3D Printed Part Kits here.
What does Functional / Non Functional Parts Mean?
This relates to printed parts for 2.4 & Trident. 0.,1 comes with all printed parts so its not applicable.
The functional parts give you all the parts required to do your first print, however some people have been underwhelmed after buying the functional parts and putting it together.
-Functional Parts will not give you an enclosed ready printer for printing ABS
-Functional Parts do not include any skirting or acrylic panel mounting.
The idea is that you could print these in PLA as they are external once you have your printer runing and then in other materials later once you have an enclosure.
You may decide that you would like to buy Functional & NON Functional parts before you start building your Kit if this does not sound ideal.
Toolhead:
- printhead_front_*selected hotend*.stl
- printhead_rear_*selected hotend*.stl
- chain_anchor.stl
- chain_anchor_10x11chains.stl
- extruder_body.stl
- extruder_motor_plate.stl
- latch_shuttle.stl
- [a]_connector_cover.stl
- [a]_guidler.stl
- [a]_latch.stl
AB Drive Units:
- a_drive_frame_lower.stl
- a_drive_frame_upper.stl
- b_drive_frame_lower.stl
- b_drive_frame_upper.stl
- [a]_z_chain_retainer_bracket_x2.stl
- [a]_cable_cover.stl
X-Carriage:
- blower_housing_rear.stl
- hotend_fan_mount.stl
- probe_retainer_bracket.stl
- x_carriage_frame_left.stl
- x_carriage_frame_right.stl
- x_carriage_pivot_block.stl
- [a]_belt_clamp_x2.stl
- [a]_blower_housing_front.stl
Clips:
- a]_z_belt_clip_lower_x4.stl
- [a]_z_belt_clip_upper_x4.stl
Front Idlers:
- front_idler_left_lower.stl
- front_idler_left_upper.stl
- front_idler_right_lower.stl
- front_idler_right_upper.stl
- [a]_tensioner_left.stl
- [a]_tensioner_right.stl
Z-Joints:
- z_joint_lower_x4.stl
- z_joint_upper_x4.stl
- z_joint_upper_hall_effect.stl
XY-Joints:
- xy_joint_left_lower.stl
- xy_joint_left_upper.stl
- xy_joint_right_lower.stl
- xy_joint_right_upper.stl
- [a]_endstop_pod_hall_effect.stl
- [a]_endstop_pod_microswitch.stl
- [a]_xy_joint_cable_bridge_generic.stl
- [a]_xy_joint_cable_bridge_igus.stl
Z-Drive:
- z_drive_main_a_x2.stl
- z_drive_main_b_x2.stl
- z_drive_retainer_a_x2.stl
- z_drive_retainer_b_x2.stl
- z_motor_mount_a_x2.stl
- z_motor_mount_b_x2.stl
- z_chain_bottom_anchor.stl
- z_chain_guide.stl
- [a]_belt_tensioner_a_x2.stl
- [a]_belt_tensioner_b_x2.stl
- [a]_z_drive_baseplate_a_x2.stl
- [a]_z_drive_baseplate_b_x2.stl
Z-Idlers:
- z_tensioner_bracket_a_x2.stl
- z_tensioner_bracket_b_x2.stl
- [a]_z_tensioner_x4_9mm.stl
Miscellaneous:
- nozzle_probe.stl
- rail_installation_guide_center_x2.stl
- bowen_retainer.stl
- spool_holder.stl
Electronics Mounting:
- plug_panel_filtered_mains.stl
DIN Brackets:
- lrs_psu_bracket_clip.stl
- raspberrypi_bracket.stl
- rs25_psu_bracket_clip.stl
- pcb_din_clip_x3.stl
Selection for Hotend parts:
- E3D V6
- Slice Mosquito
- Triangle Labs dragon
Selection for MCU brackets:
- Duet Duex
- BTT SKR 1.3 / 1.4
- BTT Octopus
- Fysetc Spider
Browse more
- Browse all Voron Parts and Accessories
- Browse the Voron 2.4
