Sold Out

Phaser FPV Transfer Stickers 300mm x 50mm

$2.00 NZD

IN STOCK ( left )

Add to Wishlist
SKU: 4151N/A W/H: U-02-B-06 N/A Barcode: N/A Shipping Weight: 30g N/A Categories: Drone Apparel , FPV Stickers , Phaser FPV , Wing Accessories Tags: Aesthetics, Phaser FPV, Wing Accessories

We accept the following payment methods

Are you looking to buy Phaser FPV Transfer Stickers 300mm x 50mm in Australia?

Awesome Transfer Stickers!

  1. Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.
  2. Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.
  3. Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
  4. Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. Leave for a couple of minutes before moving onto step 5.
  5. Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.

*Use a pin to poke any air bubbles in the center and push the air out through the hole.
*The recommended optimum temperature for applying graphics is 21 degrees. For best results do not apply a sticker in extreme hot or cold temperatures.

Please see each step in pictures below.

Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page