Are you looking to buy Phaser FPV Temperature & Humidity Sensor in Australia?
Are you wanting to buy a Temperature & Humidity Sensor in Australia?
We imported these because we found most people in 3D Printing don't dry their filament and to get the best results, its required!
When we ask customers if they knew the humidity in the room where they store their filament is stored, many have no clue. Some rooms are sitting at 70-80% some days and this means all your filament is not in great shape.
This sensor can simply sit on your desk or next to your printer so you can have a good idea of the temperature and humidity in your printing room and comes at an affordable price.
Phaser FPV recommendations
Dry your filament with the Sunlu Filament S1 + Dryer & use it while printing with a Dryer Mount OR use the Sunlu Filadryer S2 if better suited to mount on a table/desk.
You can monitor the humidity in your room with our Temperature & Humidity Sensor and also in the Sunlu Dryer with this Humidity Sensor & Humidity Mount. When printing is finished, store it in the airlock bags and remove air with NanoVac Pump. You can then place a Humidity Sensor in our spool adapter and have a good gauge of humidity on the spool when you go to print again. It may require drying again for optimal results however it won't take as long because of the storage in the bags. You can even stack all your filament on top of each other once they are in the airlock bags. Be careful of any sharp filament ends and certain spools that have sharp areas as this can puncture the bags.
The HTC-1 displays Current temperature, relative humidity, and current time - all at once on a large numeral LCD display.
The unit also offers the current Date and Day at the push of a button, along with Max and Min temperature readings, perfect for home or office.
Features
-
Large LCD Display shows Temp, Humidity & Time at same time.
-
Total LCD size: 80 × 60 mm
-
MAX / MIN Humidity & Temperature are recorded automatically and can be reset by user
-
Fahrenheit or Celsius readout (changeable by selecting F or C on back)
-
12 or 24 hour time modes (changeable by using MODE & ADJ button to set)
-
MONTH & DAY display available by pushing ADJ button
-
Integrated back stand for desktop or table use OR hanging hole for wall mounting
Specifications
- Temperature Range: —10°C to +70°C (14F to +158F)
- Temperature Accuracy: ± 1°C (1.8°F)
- Temperature Resolution: 0.1°C (0.2°F)
- Humidity Range: 10%RH to 99%RH
- Humidity Accuracy: ± 5%RH
- Humidity Resolution: 1% Battery: (1) AAA 1.5V battery required.
Package contents
- 1x Humidity/Temperature Sensor with included AAA Battery
Browse more
- Browse airlock Filament Vacuum Sealing System
- Browse Polyalchemy filaments
- Browse PLA Filaments (also PLA+)
- Browse ASA Filament
- Browse ABS Filament
- Browse PETG Filament
- Browse Nylon Filament
- Browse PC Filament
- Browse SLA Resin
- Browse Speciality Filament
- Browse TPU Filament