Are you looking to buy a FYSETC Voron V2.4 Kit in Australia?
Please note: this is a Parts kit only, printed parts are not included.
--------------------------------------------------------------------------------------------------------------
Before buying this kit please note the following disclaimers/information.
--------------------------------------------------------------------------------------------------------------
- If you have never touched a 3D printer, do not buy this kit.
- This is a significant project/build to undertake. DC electronics, advanced 3D printer knowledge is recommended. It is assumed you know how to crimp cables, own a crimper, and have sourced/printed the required 3D Parts to complete the build. Experienced Voron builders take 25-30 hours to complete a build. It's not uncommon for first-time builders to be taking 40-50 hours before everything is complete and ready to print.
- It is recommended you read the assembly manual in completion before committing to purchase and build a kit.
- Read our Voron Buying Guide & F.A.Q. in completion & note that we do not provide technical / building support via phone - We only support questions/support via email & discord.
Revision 1.1 BOM
Upgraded Specificaitons：
1. Add the extrusion head hub board Afterburner_Toolhead_X_PCB, and the hub board wiring harness with Teflon
2. Add the Z-axis limit switch board HARTK Z AXIS ENDSTOP MICROSWITCH PCB
3. A full set of labeled harnesses
4. Add PVC cable duct
5. Add hot bed insulation cotton
6. Add VORON Nevermore V5 Air Purifier
7. Equipped with Klicky-Probe leveling upgrade kit and Omron leveling switch
Bom：
|
Index |
Sort |
Component |
Qty |
|
1 |
Fasteners |
Voron V2.4 R2 fasteners Pack |
1 SET |
|
2 |
Motion |
GATES GT2 Open Belt LL-2GT-6 (6mm wide) - 1800/2000mm |
2 PC |
|
3 |
Motion |
GATES GT2 Open Belt LL-2GT-9 (9mm wide) - 1100/1200mm |
4 PC |
|
4 |
Motion |
GATES GT2 Belt Loop (6mm W) - 188mm |
4 PCS |
|
5 |
Motion |
GT2 20T Pulley (5mm ID 6mm W) 1PC remove end cap |
3 PCS |
|
6 |
Motion |
GT2 16T Pulley (5mm ID 6mm W) |
4 PCS |
|
7 |
Motion |
GT2 20T Pulley (5mm ID 9mm W) |
4 PCS |
|
8 |
Motion |
GT2 20T Toothed Idler (5mm ID 6mm W) |
2 PCS |
|
9 |
Motion |
GT2 20T Toothed Idler (5mm ID 9mm W) |
4 PCS |
|
10 |
Motion |
GT2 80T Pulley (5mm ID 6mm W) |
4 PCS |
|
11 |
Motion |
F695 Bearing |
20 PCS |
|
12 |
Motion |
625 Bearing |
12 PCS |
|
13 |
Motion |
5x60mm Shaft |
4 PCS |
|
14 |
Motion |
5x29.5mm Shaft |
1 PC |
|
15 |
Motion |
Linear Rail MGN9H 350/400mm |
7 PCS |
|
16 |
Motion |
Linear Rail MGN12H 350/400mm |
1 PCS |
|
17 |
Vibration Management |
Rubber Compressor Foot |
4 PCS |
|
18 |
Electronics |
Afterburner_Toolhead_X_PCB |
1 PC |
|
19 |
Electronics |
Afterburner_Toolhead_X_PCB Teflon wiring |
1 PC |
|
20 |
Electronics |
XY Microswitch Endstop / Z Endstop |
1 PC / 1 SET |
|
21 |
Electronics |
Omron TL-Q5MC2 - NPN Inductive Probe |
1 PC |
|
22 |
Electronics |
Omron G3NB-225B-1 SSR |
1 PC |
|
23 |
Electronics |
NEMA17 Motor 17HS19-2004S-C |
6 PCS |
|
24 |
Electronics |
NEMA17 Motor 42HS20401B-20-0.05M |
1 PC |
|
25 |
Electronics |
Mean Well LRS-200-24 PSU |
1 PC |
|
26 |
Electronics |
Inlet Power Socket IEC320 C14 |
1 SET |
|
27 |
Electronics |
40x40x10 Axial Fan (24V) |
1 PC |
|
28 |
Electronics |
40x40x20 Centrifugal Fan (24V) |
1 PC |
|
29 |
Electronics |
60x60x20 Fan (24V)kit（3 PCS） |
1 SET |
|
30 |
Electronics |
Keystone CAT6 Insert |
1 PC |
|
31 |
Electronics |
C13 Power Cord |
1 PC |
|
33 |
Controller |
sdcard 16GB |
1 PC |
|
34 |
Controller |
USB C cable |
1 PC |
|
35 |
Controller |
Spider Board |
1 PC |
|
36 |
Controller |
TMC2209 Stepper Motor Driver |
7 PCS |
|
37 |
Controller |
Mini 12864 Display |
1 PC |
|
38 |
Frame |
OpenBuilds Angle Corner Connector |
4 PCS |
|
39 |
Frame |
Misumi sectional profile Kit HFSB5-2020 SET |
18 PCS |
|
40 |
Misc |
PTFE Tube (4mm OD 2mm ID) - 1.5m |
1 PC |
|
41 |
Misc |
6x3mm Neodimium Magnet |
10 PCS |
|
42 |
Misc |
4mm Bowden Coupler |
1 PC |
|
43 |
Misc |
BMG Extruder Componnets Kit |
1 SET |
|
44 |
Misc |
E3D V6 Bowden Hotend Kit (24V) Titanium Alloy Bi-Metal Heatbreak |
1 SET |
|
45 |
Misc |
Heater φ6X15 24V 50W |
1 PC |
|
46 |
Misc |
Thermistor NTC 100K B3950 |
1 PC |
|
47 |
Misc |
DIN 3 Rails (35mm W) - 460mm |
2 PCS |
|
48 |
Misc |
DIN Rail Mount Bracket for G3A SSR |
1 PC |
|
49 |
Misc |
Fume Extractor Carbon Filter Element |
1 PC |
|
50 |
Misc |
3M VHB Tape 5952 |
1 PC |
|
51 |
Misc |
Foam Tape Thickness 1mm Length 5m |
1PC |
|
52 |
Misc |
Foam Tape Thickness 3mm Length 4m |
2 PCS |
|
53 |
Misc |
XH2.54 2/3/4 Pin Plastic shell |
1 SET |
|
54 |
Mics |
Zipties |
1 SET |
|
55 |
Cables |
Cable Kit（Pre-crimped terminals and longer wire lengths with label） |
1 SET |
|
56 |
Cables |
VORON 2.4 Chain Kit (1PC 15X10mm，2PCS 10X11) |
1 SET |
|
57 |
Panels |
Bottom/Back/Electronics Bay Panels |
3 PCS |
|
58 |
Panels |
Side/Front/Top Acrylic Panels |
4 PCS |
|
59 |
Buildplate |
MIC6 5/16" Plate - 305X305/355X355mm |
1 PC |
|
60 |
Buildplate |
Silicone AC Heater - 250X250/300x300mm (600/750W)+Thermal Fuse RH15A125（Pluggable） |
1 PC |
|
61 |
Buildplate |
JanusBPS Textured steel plate 305X305/355X355mm （One side pattern and the other side glossy PEI sticker） |
1 PC |
|
62 |
Buildplate |
Magnetic stickers 305X305/355X355mm thickness 2mm |
1 PC |
|
63 |
Buildplate |
Insulation cotton thickness 5mm |
1 PC |
|
64 |
Tool |
Cutting pliers |
1 PC |
|
65 |
Tool |
Hexagonal wrenchs |
1 SET |
|
66 |
Tool |
Thermal silica |
1 PC |
|
67 |
Mics |
PVC wiring duct 30x30mm |
1 SET |
|
68 |
Mics |
Wago 221-415 Terminals |
3 PCS |
|
69 |
Mics |
VORON Nevermore V5 |
1 SET |
|
70 |
Mics |
Weaving casing |
1 SET |
|
71 |
Mics |
The standby line 3m |
1 PC |
|
72 |
Mics |
Wiring diagram |
1 PC |
|
73 |
Electronics |
Klicky-Probe kit |
1 SET |
Browse more
- Browse all FYSETC Kits
- Browse all Voron Parts and accessories
