Are you looking to buy a Bambu Lab A1 3D Printer in Australia?
The Bambu Lab A1 3D printer revolutionises 3D printing with its Active Flow Rate Compensation, utilising a high-resolution sensor for precise extrusion. It features Full Auto Calibration for Z-offset, bed-level, and more. The Quick Swap Nozzle design allows easy hotend replacement. Active Motor Noise Cancelling minimises motor noise, and CoreXY Speed and Quality are ensured with advanced motion control. The printer syncs with Bambu Studio and Bambu Handy for remote control and monitoring, including timelapse video recording through the built-in camera. Overall, the A1 offers a streamlined and high-quality 3D printing experience.
Features
- Multi-Colour Printing (AMS lite required)
- Full-auto Calibration
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 256*256*256mm Build Volume
Active Flow Rate Compensation
The A1 revolutionises flow control in 3D printing. It utilises a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Quick Swap Nozzle
All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.
Active Motor Noise Cancelling
The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed and Quality
Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilises these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialised filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
You may also be interested in the following Bambu Lab Products
Bambu Lab AMS Lite
Bambu Lab X1E Combo
Bambu Lab X1 Carbon Combo
Bambu Lab P1S
Bambu Lab P1P
A1 Tech Specs
| Item | A1 Specification | |
| Body | Build Volume(W*D*H) | 256*256*256 mm³ |
| Toolhead | Hot End | All-Metal |
| Nozzle | Stainless Steel | |
| Max Hot End Temperature | 300 °C | |
| Nozzle Diameter | 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm |
|
| Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu High Temperature Plate (Smooth PEI) Bambu Cool Plate |
| Max Build Plate Temperature | 100°C | |
| Speed | Max Speed of Tool Head | 500mm/s |
| Max Acceleration of Tool Head | 10m/s² | |
| Supported Filament | PLA, PETG, TPU, PVA | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer |
Not Recommended | |
| Sensors | Chamber Monitoring Camera | Low Frame Rate Camera (Up to 1080P) Timelapse Supported |
| Filament Run Out Sensor | Yes | |
| Filament Odometry | Yes | |
| Power Loss Recover | Yes | |
| Filament Tangle Sensor | Yes | |
| Physical Dimensions | A1 : 385*410*430 mm³ , Package size : 552*532*320 mm³ , Net weight 8.3 kg , Gross weight 11.7 kg A1 Combo : Package size 546*536*420 mm³ , Gross weight (AMS lite included) 14.3 kg |
|
What's in the box
Bambu Lab A1
Spool Holder
Purge Wiper
Build Plate
PTFE Tube *1
Bambu Filamient Samples (Random Colour)
Stainless Steel Nozle (Pre-installed)
Accessory Box
Browse more
- Browse all Bambu Lab A1 Mini 3D Printer, Spare Parts & Accessories
- Browse all Bambu Lab AMS Lite
- Browse all Bambu Lab Filament
- Browse all Bambu Lab X1 3D Printer, Spare Parts & Accessories
- Browse all Bambu Lab P1P/P1PS 3D Printer, Spare Parts & Accessories
- Browse all Bambu AMS Spare Parts & Accessories
- Browse all Bambu Labs
- Browse all Printer Spare Parts
