Are you looking to buy Polymaker PolyLite PLA in Australia?
PolyLiteTM is a family of 3D printing filaments made with the best raw materials to deliver
exceptional quality and reliability. PolyLiteTM covers the most popular 3D printing materials to
meet your everyday needs in design and prototyping. PolyLiteTM PLA is a high-quality PLA
designed for reliability and ease of printing.
Features:
Strength and Rigidity - PolyLiteTM PLA is based on a high molecular weight PLA from
Natureworks, which makes it one of the most rigid PLA materials on the market. The
combination of good tensile strength, inter-layer adhesion and stiffness makes PolyLiteTM PLA
ideal for product design and prototyping applications that require a rigid material that is easy
to print.
Compatibility In Mind - PolyLiteTM PLA is a high quality PLA filament compatible with a wide
range of 3D printers including models from Creality, FlashForge, Monoprice, Lulzbot,
Makerbot, Ultimaker, Prusa Research, Raise3D, Tiertime and other popular extrusion based
3D printers. PolyLiteTM PLA can be printed without a heated bed and works well with common
printing surfaces, though a heated bed can be used to achieve better results (maximum
60°C).
Jam-FreeTM technology - PolyLiteTM PLA is manufactured with Polymakers Jam-FreeTM
technology which improves the heat stability of the filament with softening temperatures over
140°C and leads to excellent printing quality with zero risk of
nozzle jams caused by heat creep [1].
Uncompromised Quality - PolyLiteTM PLA filament is made with the highest quality
ingredients including Ingeo® from Natureworks. Natureworks is a world-leading biopolymers
supplier based in the USA with a portfolio of high quality raw PLA materials produced from
rapidly renewable plant resources. Combining Polymakers innovative R&D technologies,
compounding and extrusion systems with Natureworks Ingeo® resins produces a reliable 3D
printing filament to print beautiful and accurate models
Heat creep is the process of heat spreading irregularly throughout the hot end, one common example is with
all metal hot end designs. Once heat creeps towards the cold end, the PLA filament softens prematurely in the
cold end and expands resulting in a jam. Polymakers Jam-FreeTM technology increases the heat resistance of the
filament itself (not the printed part) to 140 ̊C which prevents the filament from prematurely softening in the cold
end and can still melt rapidly once entering the heating zone. The printed part will have the same heat resistance
as regular PLA: ~60 ̊C.
Specifications:
Print Settings Mechanical
Properties (X-Y)
Thermal Properties Other
Nozzle Temperature: 190 ̊C – 230 ̊C
Printing Speed: 40mm/s – 60mm/s
Bed Temperature: 25 ̊C – 60 ̊C
Bed Surface: Glass with glue, Blue Tape, BuildTak®
Cooling Fan: ON
Note: Printing conditions may vary with different printers and nozzle diameters.
Young’s Modulus:
2636 ± 330 Mpa
Tensile Strength:
46.6 ± 0.9 Mpa
Bending Strength:
85.1 ± 2.9 Mpa
Impact Strength:
2.68 ± 0.16 kJ/m2
Glass Transition Temperature: 61 ̊C
Heat Deflection Temperature (0.45 MPa): 59.8 ̊C
Heat Deflection Temperature (1.8 MPa): 58.1 ̊C
Vicat Softening Temperature: 62.9 ̊C
Density: 1.17 g/cm3
Recommended Support Materials: PolyDissolveTM S1, PolySupportTM
Disclaimer: The typical values presented in Polymakers data sheet are intended for
reference and comparison purposes only. Due to the nature of 3D printing they should not
be used for design specifications or quality control purposes.
Storage: It is recommended to store PolyLiteTM PLA in the PolyBoxTM to prevent moisture
absorption which will lower the quality and the mechanical properties of the print. If the
filament has absorbed moisture it can be dried at 55 ̊C for 6 hours in a convection oven.
Browse more
- Browse Polymaker
- Browse ASA Filament
- Browse ABS Filament
- Browse Nylon Filament
- Browse PC Filament
- Browse PETG Filament
- Browse PLA Filaments (also PLA+)
- Browse PVA Filament
- Browse Silk Filament
- Browse SLA Resin
- Browse Speciality Filament
- Browse TPU Filament
