Ā Ā Ā Ā
Are you looking to buyĀ Matek H743-SLIM FPV Flight Controller in Australia?
The Matek Flight Controller H743-SLIM is one of the latest flight controllers on the FPV market. Loaded with an array of features and tons of room for peripherals, this board lets you choose how you want to fly.Ā
New features in the H743-SLIM include switchable dual camera inputs and a max voltage of 36V(8S).
Visit the manufacturer page for more infoĀ hereĀ
FeaturesĀ
- MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash
- V3: IMU ICM42688P, ICM42605
- Baro: Infineon DPS310 (I2C2)
- OSD: AT7456E (SPI2)
- Blackbox: MicroSD card socket (SDIO)
- 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
- 13x PWM outputs(including āLEDā pad)
- 2x I2C
- 1x CAN
- 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- 1x SPI3 breakout
- USB Type-C(USB2.0)
- 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
- 1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G)
- Dual Camera Inputs switch
- 5V/Vbat filtered power ON/OFF switch
- DJI FPV OSD is supported by any spare UART
Specifications
- Vbat Input: 6~36V (2~8S LiPo)
- BEC: 5V 2A cont. (Max.3A)
- LDO 3.3V: Max.200mA
- No Current Sensor built-in
- ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K)
- Static power: 190mA@5V with Betaflight,Ā 130mA@5V with ArduPilot
- Mounting: 30.5 x 30.5mm, Ī¦4mm with Grommets Ī¦3mm
- Dimensions: 36 x 36 x 5 mm
- Weight: 7g
Tips
- ArduPilot(ChiBiOS): MATEKH743
- BetaFlight: MATEKH743
- INAV: MATEKH743 (To be supported soon)
Includes
- 1x H743-SLIM
- 6x Silicon grommets M4 to M3
- 1x JST-SH1.0_8pin cable, 5cm
- 2x JST-SH1.0_8pin connectors
- 1x JST-GH-4P to JST-GH-4P cable for CAN port, 20cm
Ā
BROWSE MORE
- Browse allĀ Flight Controllers
- Browse allĀ Drone Electronics
- Browse allĀ Matek
Ā
