Are you looking to buy SpeedyBee F405 40A Bluejay 25.5x25.5 3-6S Flight Controller in Australia?
Introducing the SpeedyBee SpeedyBee F405 40A Bluejay Flight Controller!
Specifications
- Flight Controller
- Product Name: SpeedyBee F405 AIO
- MCU: STM32F405
- Gyro: ICM-42688P
- USB Port Type: Type-C
- Barometer: SPA06-003
- OSD: Supported
- Bluetooth BLE: Supported, Bluetooth speed enhancement - 2.0
- Wireless Flight Controller Firmware Update: Supported (no need to press physical BOOT button)
- Wireless Download & BlackBox Analysis: Not supported
- DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering
- 6-pin DJI Sky Port Direct Insertion: Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order
- Flash (for BlackBox): 8MB
- Betaflight CC Pads (Camera Parameter Adjustment): Supported
- Input Voltage: 3S-6S LiPo battery
- 4V5 Output: Two 4V5 outputs; total current 1A
- 5V BEC Output: Three 5V outputs; total current 2A; shared with 4V5
- 9V BEC Output: None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A
- MOTOR: M1-M4
- UART: 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])
- ESC Telemetry: None
- I2C: Supported
- LED Pads: Supported, used to control WS2812 LED lights
- Buzzer Pads: Supported, BZ+ and BZ- pads
- BOOT Button: Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery
- RSSI Pads: None
- SmartPort: Not supported
- Supported Flight Controller Firmware:: BetaFlight (Default), INAV
- Firmware Target Name: SPEEDYBEE F405AIO
- Mounting: 25.5 x 25.5mm, 3mm hole diameter
- Dimensions: 33.0mm (length) x 33.0mm (width) x 8mm (height)
- ESC
- Product Name: SpeedyBee F405 AIO
- Input Voltage: 3-6S LiPo battery
- Continuous Current: 40A
- Burst Current: 45A (10s)
- ESC Protocol: Supports DSHOT600/300; other protocols may cause severe errors, please use with caution.
- Output Voltage: VBAT battery voltage (used to power the flight controller)
- Current Sensor: Supported (Scale = 254, Offset = 0)
- Firmware: Bluejay JH-40 48kHz
- Weight: 13.6g (including CNC)
Includes
- 1x SpeedyBee F405 AIO
- 1x Soldering Practice Board
- 1x DJI Air Unit 6pin*80mm Connection Cable
- 1x 35V 470uf Electrolytic Capacitor
- 4x M2*6.6mm Silicone Dampening Sleeves
- 5x M2 Silicone Dampening Ring
- 5x M2 Nylon Hex Nut
- 1x XT30 Power Cable (5cm)
- 1x Type-C Extension Module
- 1x Power Expansion Board
- 1x BEC
- 1x Black Heat Shrink Tube for Type-C Extension Module
- 1x 4pin*80mm Cable for Type-C Extension Module
- 4x M2*20mm Screws for F405 AIO & VTX Installation
- 4x M2*12mm Screws for F405 AIO Installation
- 1x Transparent Heat Shrink Tube for External BEC
- 1x 6-pin*30mm Cable for External BEC
- 2x Capacitor Heat Shrink Tube
- 1x User Manual
Browse More
- Browse All Speedybee FC
- Browse All F4 Flight Controllers
- Browse All Flight Controllers