Are you looking to buy eSun Luminous Rainbow PLA Filament in Australia?
Features:
It’s modified based on PLA material, has the easy printing characteristics of PLA and added with gorgeous luminous star appearance. PLA is a biological material refined from corn grains and naturally degradable without affecting the environment. Compared with ABS, PLA does not require a closed chamber, has low shrinkage, no warping, no cracking, and can print large models without irritating odors during printing.
NOTE: Rainbow filaments vary each batch in colour and colour length. Do not take the photos on this site as an accurate colour as what you will receive. If you are needing 100% in the picture please do not buy this product, you may be disappointed. Rainbow filament is perfect for large prints wanting a rainbow effect such as vases. If you are printing small objects then it will likely be only one colour. If wanting small objects in rainbow you will need to print many of them on the same bed so that the rainbow effect is filtered across all the objects.
Product properties:
- Gorgeous luminous star appearance
- Absorb energy during the day and glow at night
- Excellent printability, good interlayer adhesion, no warping
Product parameters:
Physical performance indicators :
|
3D PRINTING FILAMENT |
Test Method |
PLA |
|
Melt Flow Index(g/10min) |
GB/T 3682-2000 |
3.5(190℃/2.16kg) |
|
Density |
1.2g/cm3 |
|
|
IZOD Impact Strength(kJ/㎡） |
GB/T 1843-96 |
5.4kJ/m2 |
|
Tensile Strength(MPa） |
GB/T 1040-92 |
72MPa |
|
Elongation at Break(%) |
GB/T 1040-92 |
11.8% |
|
Flexural Strength(MPa) |
GB/T 9341-2000 |
90MPa |
|
Flexural Modulus(MPa) |
GB/T 9341-2000 |
1915MPa |
|
Heat Distortion Temp |
GB/T 1634-2001 |
53℃ |
Printing parameters:
|
Filament |
eStars-PLA |
|
Recommended printing temperature |
210-230℃ |
|
Bed |
45-60℃ (Masking paper, PVP solid glue, glass board, carbon fiber board, PEI) |
|
Fan |
100% |
|
Printing speed |
40-100mm/s |
Precautions:
Luminous filaments are very easy to grind nozzles and extruder gears. It is recommended to use hardened steel nozzles or ruby nozzles. Hardened steel extruder gears can be selected if possible. If the throat printing time is long, it needs to be replaced.
Browse more
- Browse all Luminous Filament
- Browse all Rainbow Filament
- Browse all eSun Filament