Sold Out

LDO PCB Breakout Board

$13.00 NZD

left in stock

Add to Wishlist
SKU: 24465N/A W/H: V-04-E-15 N/A Barcode: N/A Shipping Weight: 23g N/A Categories: 3D Printer Parts , LDO , Voron Kits & Replacement Parts Australia Tags: LDO, Voron 2.4, Voron 3D Printer, Voron Trident

We accept the following payment methods
       

Are you looking to buy an LDO ToolHead PCB and Breakout Board kit in Australia?

 

This Kit includes 1x Breakout board. Cables can be found here

The Toolhead Cable

The toolhead cable is a cable designed to be carried through the gantry cable chains within Voron printers. All individual wires within the cable are UL1332 high strand count cables. UL1332 wires have durable FEP insulation to reduce friction between the wires and cable chain. The high strand count helps prevent breakage with repeated bending cycles.

Caution! The zipties that come with the cable must be removed prior to installation into the cable chains. These zipties are used to prevent tangling during shipping, however, they can get caught within the cable chain and can cause damage if not removed. 

The Breakout PCB

The breakout PCB serves the opposite purpose of the toolhead PCB - it breaks out the 14pin toolhead cable into individual ports that can then be connected to the mainboard. The breakout PCB have ports that correspond to their counterparts in the toolhead PCB. The breakout PCB also accepts the 4 pin endstop cable included in LDO kits. 

Port Descriptions

The table below briefly describes the purpose of each port located on the breakout PCB. 

PCB Label Name Connector Description
HEF/24V Hotend Fan* JST-XH-2P Fan port for cooling the hotend heatsink. HEF denotes the negative pin.
PCF/24V Part Cooling Fan* JST-XH-2P Port for part cooling fan. PCF denotes the negative pin.
HE0/24V Hotend Heater* Microfit3-2P Port for hotend heater cartridge. HE0 denotes the negative pin.
TH0/GND Hotend Thermistor JST-XH-2P Thermistor port for hotend. TH0 denotes the signal pin.
CT/GND Chamber Thermistor JST-XH-2P Thermistor port for the onboard thermistor on the toolhead PCB. CT denotes the signal pin.
XES/GND X Endstop JST-XH-2P X endstop port. XES denotes the signal pin
YES/GND Y Endstop JST-XH-2P Y endstop port. YES denotes the signal pin
Vin/X/Y/GND Input for the Endstop PCB JST-XH-4P The input port from the endstop PCB used in V2.4 or Trident. If a hall endstop PCB is used, extra circuit on the PCB needs to be populated to generate 5V at Vin. This port is not used in Switchwire builds.
24V/ABL/GND Probe JST-XH-3P Probe port. 
E-MOTOR E Stepper Motor JST-XH-4P Extruder stepper motor port
CFAN/24V Chamber Fan** JST-XH-2P  Connects to the electronics chamber fan in the switchwire. CFAN denotes the negative pin.
LED/24V LED** JST-XH-2P  Connects to the LED strip in the switchwire. LED denotes the negative pin.
CFAN/LED Chamber Fan + LED Control Signal** JST-XH-2P  Connects to the LED/CFAN control signals on the mainboard. Only used in Switchwire. 

*Caution! Note that polarity matters when making connections between the breakout PCB and your mainboard. Incorrect polarity can cause a short circuit and destroy your mainboard! 

**Only used in Switchwire builds.

Unpopulated Circuitry on the Breakout PCB

The breakout PCB contains two circuits that may or may not be populated:

  1. Mosfet circuit for CFAN/LED. This circuit is only populated for breakout boards supplied in Switchwire kits.
  2. 5V power supply circuit. This circuit generates a small 5V supply the Vin pin for those that wish to use the Hall Endstop PCB. If you wish to solder this circuit yourself, check the circuit below. Note that this circuit is not designed for high current loads and should only be used to power the hall endstop PCB.
Breakout Board 5V circuit
Ref Item Form Factor
U1 7805 Voltage Regulator  SOT-89
C3 330NF, 50V Capacitor 0603
C4 100NF, 50V Capacitor 0603

Browse more

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page