Are you looking to buy AC to DC 19v 4.74A 90W Refurbished Power Supply for Lipo Chargers with XT60 Cable Adapter in Australia?
Do you need a DC power supply for your FPV Lipo Charger that uses an XT60 input? Look no further!
With many chargers on the market like the ISDT Q6 Nano / ToolkitRC M6 & M7 requiring an XT60 power input we thought why not make a complete package that includes the required adapter cable ready to use with a 19v DC Refurbished Power Supply. These chargers have been tested, have C-Tick/RCM Compliance and will work well for Charging your lipos at a great budget price.
You can calculate your charging amperage by dividing the total wattage by your cell voltage. Some examples are below
4s Battery - 13.5v = flat - 16.8v = charged
90/13.5 = 6.6a
90/16.8 = 5.3a
So in this case you would want to charge at a max rate of 5.3 amps if charging 4s batteries.
6s Battery - 20v = flat - 25.2v = charged
90/20=4.5a
90/25.2= 3.5a
So in this case you would want to charge at a max rate of 3.5 amps if charging 6s batteries.
If you overdraw the wattage on the power supply it will usually reboot your charger or turn off and you will need to power cycle it. You can check the wattage draw on your charger status screen
Please note power supplies may vary slightly in brand and size from time to time due to supply issues.
This Power supply can also power a TS100, TS101 or Pinecil Soldering Iron if you have the XT60 to DC5525 Cable
Specifications
- Input Voltage: AU Standard AC 100-240V~1.5A
- Input Frequency: AU Standard 50Hz - 60Hz
- Output Voltage: 19V - 4.74A - 90W
- Certifications: C-Tick, CE,
- Australian Style 3Pin Power Cable
- DC 5.5x2.1mm Jack
Includes
- DC to XT60 Adapter Cable (so you can connect to DC charger)
- 1x Power Cable
- 1x 19V 90w DC Power Supply
Browse all
Browse all LiPo Chargers
Browse all LiION Chargers
Browse all LiPo Batteries
Browse all cables and connectors
